Roadway Width 5.7m Pontoon Equipment Military Pontoon Bridge
Roadway Width 5.7m Pontoon Equipment Military Pontoon Bridge is a set of self-propelled heavy pontoon equipment used for
constructing 60tf floating bridges and 60tf ferry rafts over
current velocity not higher than 3m/sec. The load capacity for
tracked load is 60T, and for wheeled load on axle is 13T.The
complete set consists of 8 interior bays, 2 ramp bays and 10
transporters of pontoon.
Specifications for Roadway Width 5.7m Pontoon Equipment Military Pontoon Bridge |
|
Floating bridge |
|
Length of one complete set | 104m |
Load capacity | 60t(tracked load), 13t(axle load) |
Roadway width | 5.7m |
Current velocity | ≤3.0m/s |
Length of a single pontoon unit | 10m |
Ramp Height | not less than 3m |
|
|
Rafts |
|
One raft consists of 3 interior bays and 1 ramp bay |
|
Number of combined ferry raft | 2 |
Load capacity | 60t(tracked load), 13t(axle load) |
Max. speed with full load | 3.0m/s |
Max. speed with empty load | 4.0m/s |
Transport vehicle of Roadway Width 5.7m Pontoon Equipment Military
Pontoon Bridge
Transport vehicle is refitted by 8×8 wheeled cross-country truck,
with turning rack, mobile platform, stable support leg, hanger
frame, hydraulic system and electrical system on it.
The transport vehicle is used to fold, load and transport interior
and shore bays as well as to transport and erect gangplank.
Transport vehicle performance data
| Items | Data |
| No load (L×W×H) | ≤12m×3.4m×3.1m |
| Loaded interior bay (L×W×H) | ≤13m×3.5m×4m |
| Loaded shore bay (L×W×H) | ≤13m×3.5m×4m |
| Chassis vehicle | 8×8-wheel country-cross truck |
| Total weight of cross-country trucks | ≯31.5t |
| Max Speed | ≮85km/h |
| Max Gradient | ≮40% |
Harzone Industry was built in 1967, one of the subsidiary units of China State Shipbuilding Corporation Limited(CSSC), a state-owned and protected military company. Over the past four
decades, the leaders of both the Party and nation have been caring
for the growth of the company. Chairman Mao underlined the
documents for the factory establishment. Later, ZhangAiping., one
General, and Chen Shiju, one commander, inscribed name for the
company. In 2008, Mr. He Guoqiang, Standing Committee of Political
Bureau of CPC Central Committee, Secrrtary of the Discipline
Inspection Commission of CPC Central Committee had paid a visit to
the company and inspected the workshop and saw the erection of the
mechanized bridge, who also encouraged the company to develope
well.
Righe now, the company has one research center in Wuhan, which is
the national degree, one trading center in Beijing, one
manufactuing center in Chibi, three offices in Gana, Ethiopia and
Peru.
Harzone Industry has enjoyed a proud history, it must also create a bridge future.
